WLAN networks

The wireless network settings for your device are located under Wireless-LAN > WLAN-Networks.





General

Country
Here you configure the country where the device is operated. Depending on this, the appropriate regulatory limits are set automatically.

Client Isolation

Client isolation prevents WLAN clients from communicating with one another or with unauthorized destinations on the network.

Data traffic from WLAN clients to destinations that are not explicitly whitelisted is prohibited.

Client isolation can be switched on per SSID. Configure this under Wireless-LAN > WLAN-Networks > Network > Client Isolation. Then configure the allowed destinations under Wireless-LAN > WLAN-Networks > allowed destinations.





Network-Name
Select the network / SSID that the entry should apply for. Then enter either a destination IP address or destination MAC address.
Note: In hotspot scenarios, the MAC address of the gateway should be entered here to ensure Internet access. It is not sufficient to specify its IP address because in this scenario the destination IP address is that of a destination on the Internet.
Note: The feature automatically determines the appropriate gateway address from a DHCP negotiation between a WLAN client and a DHCP server. However, in roaming scenarios there is usually no renewed DHCP negotiation during roaming, so in this case the gateway must be explicitly whitelisted.
IP-Network
Allowed destination IP address for this network.
MAC-Address
Allowed destination MAC address for this network.

www.lancom-systems.com

LANCOM Systems GmbH | Adenauerstr. 20/B2 | 52146 Wuerselen | Germany | E-Mail info@lancom.de

LANCOM Logo