Adjust the detailed settings of the steering profiles or create a new profile under
.Note: LANCOM recommends using the preset profiles.

- Profile name
- Give this profile a name.
- Operation
- Controls whether band steering is active for this profile.
- Steering min. PHY signal
- Specifies the client signal strength (in dB) below which client steering is initiated.
- Upgrade TX rate threshold
- Specifies the limit value of the transmission rate (in kbps), at which the client should potentially be steered to the 5-GHz band.
- Upgrade PHY signal threshold
- Specifies the client signal strength (in dB) required as a minimum before the client is considered for steering to the 5-GHz band.
- Downgrade TX rate threshold
- Specifies the limit value of the transmission rate (in kbps), at which the client should potentially be steered to the 2.4-GHz band.
- Downgrade PHY signal threshold
- Specifies the client signal strength (in dB) that must be exceeded before the client is considered for steering to the 2.4-GHz band. For steering to 2.4 GHz (downgrade), the signal strength has to fall below the value configured here and also below the Downgrade TX rate threshold value.
- 2.4-GHz sub-profile
- Here you configure which 2.4-GHz sub-profile is used.
- 5-GHz sub-profile
- Here you configure which 5-GHz sub-profile is used.