Configuring automatic uploads via USB

The steps below will show you how to configure automatic uploading from a USB storage medium.

  1. Start LANconfig and open the configuration dialog for the device.
  2. Navigate to the dialog Management > Advanced.




  3. (De-)activate the automatic loading of loader and/or firmware files via the selection list Firmware. Select the appropriate option.
    • Off: Automatic loading of loader and/or firmware files is deactivated.
    • On unconfigured device Device: Automatic loading of loader and/or firmware files is only activated when the device has its factory settings. After successfully using the Wizards to configure the security settings and basic settings, set this option to Off.
    • On: Automatic loading of loader and/or firmware files is activated. When a USB medium is mounted, a suitable loader and/or firmware file is uploaded to the device. The USB medium is mounted when it is plugged into the USB port on the device, or when it is restarted.
  4. (De-)activate the automatic loading of configuration and/or script files via the selection list Configuration. Select the appropriate option.
    • Off: Automatic loading of configuration and/or script files is deactivated.
    • On unconfigured device Device: Automatic loading of configuration and/or script files is only activated when the device has its factory settings. After successfully using the Wizards to configure the security settings and basic settings, set this option to Off.
    • On: Automatic loading of configuration and/or script files is activated. When a USB medium is mounted, a suitable configuration and/or script file is uploaded to the device. The USB medium is mounted when it is plugged into the USB port on the device, or when it is restarted.

That's it! This completes the configuration of automatic uploads from a USB medium.

Important: A device can be fed with an undesirable configuration by resetting it to its factory settings and inserting a prepared USB data media. To prevent this you have to deactivated the reset switch.

www.lancom-systems.com

LANCOM Systems GmbH | A Rohde & Schwarz Company | Adenauerstr. 20/B2 | 52146 Wuerselen | Germany | E‑Mail info@lancom.de

LANCOM Logo