EAPOL-Rate

Set the data rate in Mbps for EAPOL transmission.

WLAN clients use EAP over LAN (EAPOL) to login to the access point by WPA and/or 802.1x. They encapsulate EAP packets in Ethernet frames to allow EAP communications on layer-2 connections.

Under certain circumstances it may be desirable to select a lower data rate for the transfer of EAPOL packets than that available for the payload data. For example, in the case of mobile WLAN clients, high data rates can cause the loss of EAPOL packets, which in turn leads to considerable delays in client association. This procedure can be stabilized by selecting specific data rates for EAPOL.

SNMP ID:
2.23.20.19.19 
Console path:
Setup > Interfaces > WLAN > Interpoint-Transmission
Possible values:
Like-Data
In this setting, the device transmits the EAPOL data at the same rate as payload data.
1M
2M
5.5M
11M
6M
9M
12M
18M
24M
36M
48M
54M
HT-1-6.5M
HT-1-13M
HT-1-19.5M
HT-1-26M
HT-1-39M
HT-1-52M
HT-1-58.5M
HT-1-65M
HT-2-13M
HT-2-26M
HT-2-39M
HT-2-52M
HT-2-78M
HT-2-104M
HT-2-117M
HT-2-130M
Default:
Like-Data

www.lancom-systems.com

LANCOM Systems GmbH | A Rohde & Schwarz Company | Adenauerstr. 20/B2 | 52146 Wuerselen | Germany | E‑Mail info@lancom.de

LANCOM Logo