Use this command in User EXEC or Privileged EXEC mode to see the configuration values (including all defaults) for a specified IP SLAs operation or all operations.
| Format | show ip sla configuration [operation-number] |
| Mode | Privileged EXEC |
| Parameter | Description |
|---|---|
| operation-number | IP SLA number of a specific operation associated with the statistics to display. |
Example: IP SLAs Internet Control Message Protocol (ICMP) echo operations support both IPv4 and IPv6 addresses. The sample outputs from the show ip sla configuration command for different IP SLAs operations in IPv4 and IPv6 networks are shown below.
(Routing)#show ip sla configuration 3
Entry number: 3
Type of operation: echo
Target address/Source address: 1.1.1.1/0.0.0.0
Operation timeout (milliseconds): 5000
Vrf Name:
Schedule:
Next Scheduled Start Time: Start Time already passed
Operation frequency (seconds): 60
Life: Forever
Threshold (milliseconds): 5000
Example: In the following example the output from the show ip sla configuration command when the specified operation is an ICMP echo operation in an IPv6 network is shown:
(Routing)#show ip sla configuration 5
Entry number: 3
Type of operation: echo
Target address/Source address: 2001:DB8:100::1/2001:0DB8:200::FFFE
Operation timeout (milliseconds): 5000
Vrf Name:
Schedule:
Next Scheduled Start Time: Pending Trigger
Operation frequency (seconds): 60
Life: Forever
Threshold (milliseconds): 5000
