This command displays the list of neighboring devices.
| Format | show isdp neighbors [{unit/slot/port | detail}] |
| Mode | Privileged EXEC |
| Term | Definition |
|---|---|
| Device ID | The device ID associated with the neighbor which advertised the information. |
| IP Addresses | The IP addresses associated with the neighbor. |
| Capability | ISDP functional capabilities advertised by the neighbor. |
| Platform | The hardware platform advertised by the neighbor. |
| Interface | The Interface (unit/slot/port) on which the neighbor's advertisement was received. |
| Port ID | The port ID of the interface from which the neighbor sent the advertisement. |
| Hold Time | The hold time advertised by the neighbor. |
| Advertisement Version | The version of the advertisement packet received from the neighbor. |
| Entry Last Changed Time | Time when the entry was last modified. |
| Version | The software version that the neighbor is running. |
Example: The following shows example CLI display output for the command.
(Switching) #show isdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge,
S - Switch, H - Host, I - IGMP, r - Repeater
Device ID Intf Holdtime Capability Platform Port ID
-------------------- ----- --------- ------------ -------------------- --------------------
Switch 0/1 165 RI LANCOM xxx GigabitEthernet1/1
Example: The following shows example CLI display output for the command.
(Switching) #show isdp neighbors detail
Device ID 0001f45f1bc0
Address(es):
IP Address: 10.27.7.57
Capability Router Trans Bridge Switch IGMP
Platform SecureStack C2
Interface 0/48
Port ID ge.3.14
Holdtime 131
Advertisement Version 2
Entry last changed time 0 days 00:01:59
Version: 05.00.56
