This command displays the MLAG (VPC) global status and current MLAG operational mode (the MLAG is in operational mode if the preconditions are met). The peerlink and keepalive statuses, as well as the number of configured and operational MLAGs and the system MAC and role are displayed.
| Format | show vpc brief |
| Mode | Privileged EXEC |
Example: The following shows an example of the command.
(Switching) # show vpc brief
VPC Domain ID...................................1
VPC config Mode................................ Enabled
Keepalive config mode.......................... Enabled
VPC operational Mode........................... Enabled
Self Role...................................... Primary
Peer Role...................................... Secondary
Peer detection................................. Disabled
Operational VPC MAC.............................aa:bb:cc:dd:ee:ff
Operational VPC system priority.................32767
VPC Guard Timer.................................3 seconds
Peer-Link details
-----------------
Interface...................................... 3/2
Peer link status............................... UP
Peer-link STP Mode............................. Disabled
Configured Vlans............................... 1
Egress tagging................................. none
VPC Details
-----------
Number of VPCs configured...................... 1
Number of VPCs operational..................... 1
VPC id# 1
-----------
Interface...................................... 3/1
Configured Vlans............................... 1
VPC Interface State............................ Activeve-Active
VPC Interface State............................ Active
VPC Peer Interface State....................... Active
VPC Revertive Mode............................. Not Applicable
VPC Link Status................................ Up
Local MemberPorts Status
----------------- ------
0/19 UP
0/20 UP
0/21 UP
0/22 UP
Peer MemberPorts Status
---------------- ------
0/27 UP
0/28 UP
0/29 UP
0/30 UP
