This command displays information about an MLAG (VPC). The configuration and operational modes of the MLAG are displayed; the MLAG is operationally enabled if all the preconditions are met. The port-channel that is configured as an MLAG interface is also displayed with the member ports on the current switch and peer switch (with their link status).
| Format | show vpc id |
| Mode | User EXEC |
Example: The following shows an example of the command.
(Switching) # show vpc 10
VPC id#10
-----------------
Config mode.................Enabled
Operational mode............Enabled
Port channel................3/1
VPC mode....................active-active
VPC revertive mode..........Not applicable
Self member ports Status
----------------- ---------
0/2 UP
0/6 DOWN
Peer member ports Status
----------------- ---------
0/8 UP
