Use this command to display all the global NTP configuration parameters.
| Default | None |
| Format | show ntp |
| Mode | Global Config |
The following fields are displayed for the NTP client
| Parameter | Description |
|---|---|
| Admin Mode | The client mode: disabled, unicast, or broadcast. |
| Authentication Mode | NTP authentication is enabled or disabled. |
| Broadcast Delay | The delay in microseconds (delay in receiving broadcast packets from the server). |
| Source Interface | Source interface used in NTP client communication with the server. |
| Source IPv4 Address* | IPv4 address when not null. |
| Source IPv6 Address* | IPv6 address when not null. |
| VRF Name | The VRF instance the client is associated with. |
Example: The following shows an example display output for the command:
(Routing) #show ntp Admin Mode ....................... Disabled Authentication Mode .............. Disabled Broadcast Delay .................. 3000 Source Interface .................. 0/1 Source IPv4 Address ............... 1.1.1.1 Source IPv6 Address ............... :: VRF Name .......................... test (Routing) #
