snmp-server user

This command creates an SNMPv3 user for access to the system.

Default	No default users are created.
Format	`snmp-server user username groupname [remote engineid-string] [ {auth-md5 password \| auth-sha password \| auth-md5-key md5-key \| auth-sha-key sha-key} [priv-des password \| priv-des-key des-key]\|[priv-aes128 password \| priv-aes128-key aes128-key]}`
Mode	Global Config

Parameter	Description
username	The username the SNMPv3 user will connect to the switch as. The range is 1 to 30 characters.
group-name	The name of the group the user belongs to. The range is 1 to 30 characters.
engineid-string	The engine-id of the remote management station that this user will be connecting from. The range is 5 to 32 characters.
password	The password the user will use for the authentication or encryption mechanism. The range is 1 to 32 characters.
md5-key	A pregenerated MD5 authentication key. The length is 32 characters.
sha-key	A pregenerated SHA authentication key. The length is 48 characters.
des-key	A pregenerated DES encryption key. The length is 32 characters if MD5 is selected, 48 characters if SHA is selected.
priv-aes128-key	HMAC-MD5-96 authentication pre-generated key.
priv-aes128	Advanced encryption standard 128 password.