show ip igmp groups

This command displays the registered multicast groups on the interface. The argument unit/slot/port corresponds to a physical routing interface or VLAN routing interface. The keyword vlan is used to specify the VLAN ID of the routing VLAN directly instead of in a unit/slot/port format. If [detail] is specified this command displays the registered multicast groups on the interface in detail.

Format show ip igmp groups {unit/slot/port|vlan 1-4093 [detail]}
Mode Privileged EXEC

If you do not use the detail keyword, the following fields appear:

Field Definition
IP Address The IP address of the interface participating in the multicast group.
Subnet Mask The subnet mask of the interface participating in the multicast group.
Interface Mode This displays whether IGMP is enabled or disabled on this interface.

The following fields are not displayed if the interface is not enabled:

Field Definition
Querier Status This displays whether the interface has IGMP in Querier mode or Non-Querier mode.
Groups The list of multicast groups that are registered on this interface.

If you use the detail keyword, the following fields appear:

Field Definition
Multicast IP Address The IP address of the registered multicast group on this interface.
Last Reporter The IP address of the source of the last membership report received for the specified multicast group address on this interface.
Up Time The time elapsed since the entry was created for the specified multicast group address on this interface.
Expiry Time The amount of time remaining to remove this entry before it is aged out.
Version1 Host Timer The time remaining until the local router assumes that there are no longer any IGMP version 1 multicast members on the IP subnet attached to this interface. This could be an integer value or "-----" if there is no Version 1 host present.
Version2 Host Timer The time remaining until the local router assumes that there are no longer any IGMP version 2 multicast members on the IP subnet attached to this interface. This could be an integer value or "-----" if there is no Version 2 host present.
Group Compatibility Mode The group compatibility mode (v1, v2 or v3) for this group on the specified interface.

www.lancom-systems.com

LANCOM Systems GmbH | A Rohde & Schwarz Company | Adenauerstr. 20/B2 | 52146 Wuerselen | Germany | E‑Mail info@lancom.de

LANCOM Logo