neighbor remote-as (BGP Router Config)

This command configures a neighbor and identifies the neighbor's autonomous system. The neighbor's AS number must be specified when the neighbor is created. Up to 256 neighbors may be configured. Inheriting a template with the remote- as parameter automatically creates the neighbor if the neighbor does not exist.

Default	No neighbors are configured by default.
Format	`neighbor {ip-address \| ipv6-address [interface interface-name] \| autodetect interface interface-name remote-as as-number`
Mode	BGP Router Config Peer Template Config

Parameter	Description
ip-address	The neighbor's IP address.
ipv6-address [interface interface-name]	The neighbor's IPv6 address. if the neighbor's IPv6 address is a link local address, the local interface must also be specified.
autodetect interface interface-name	The routing interface on which the neighbor's link local IPv6 address is auto-detected.
as-number	The autonomous system number of the neighbor's AS. The range is 1 to 429496729. If the neighbor's AS number is the same as the local router, the peer is an internal peer. Otherwise, the peer is an external peer. A neighbor can inherit this configuration from a peer template.