This command displays a list of IPv6 routes received from a specific neighbor. The list includes either all routes received from the neighbor, received routes that passed inbound policy, or routes rejected by inbound policy. The output and format as the same as for the show ip bgp neighbors IPv4 command, except:
- IPv6 routes are listed
- If the peer address ("Remote Address") is a link local address, the next line of output indicates the scope of the address.
- No "IPv4 Outbound Update Group" is listed.
- No IPv4 prefix statistics are shown.
- RFC 5549 Support is displayed only if the BGP neighbor is peered over IPv6 network.
- If the peer is configured as autodetect, the Remote Address shows detected IPv6 address or Unresolved in case if the peer is not detected by the autodetect feature.
- Autodetect status is displayed only if the peer is configured as "autodetect". The field shows one of the following statuses: "Peer is detected", "Peer is not detected" or "Multiple peers are detected".
| Format | show bgp ipv6 neighbors [ipv4-address | ipv6-address [interface interface-name] | autodetect interface interface-name {received-routes | routes | rejected-routes} |
| Mode | Privileged EXEC |
Example:
(Routing) # show bgp ipv6 neighbors fe80::2
Description: spine 1 router 1
Remote Address ................................ fe80::2
Autodetect status ............................. Peer is detected
Interface...................................... 0/1
Remote AS ..................................... 100
Peer ID ....................................... 14.3.0.1
Peer Admin Status ............................. START
Peer State .................................... ESTABLISHED
Peer Type ..................................... DYNAMIC
Listen Range .................................. 2001::1/64
Local Port .................................... 179
Remote Port ................................... 58265
Connection Retry Interval ..................... 120 sec
Neighbor Capabilities ......................... None
IPv4 Unicast Support .......................... None
IPv6 Unicast Support .......................... Both
Graceful Restart Support....................... Enabled
Graceful Restart Helper Support................ Enabled
RFC 5549 Support .............................. Enable
Update Source.................................. None
Local Interface Address ....................... fe80::2
Configured Hold Time .......................... 90 sec
Configured Keep Alive Time..................... 30 sec
Negotiated Hold Time .......................... 30 sec
Keep Alive Time ............................... 10 sec
MD5 Password................................... password
Last Error (Sent).............................. Hold Timer Expired
Last SubError.................................. None
Time Since Last Error.......................... 0 day 0 hr 4 min 27 sec
Established Transitions ....................... 1
Established Time .............................. 0 day 0 hr 4 min 25 sec
Time Since Last Update ........................ 0 day 0 hr 4 min 24 sec
IPv6 Outbound Update Group..................... 7
Open Update Keepalive Notification Refresh Total
Msgs Sent 1 0 10 0 0 11
Msgs Rcvd 1 1 11 0 0 12
Received UPDATE Queue Size: 0 bytes. High: 355. Limit 196096. Drops 0.
IPv6 Prefix Statistics:
Inbound Outbound
Prefixes Advertised 1 0
Prefixes Withdrawn 0 0
Prefixes Current 1 0
Prefixes Accepted 1 N/A
Prefixes Rejected 1 N/A
Max NLRI per Update 1 0
Min NLRI per Update 1 0
