Use this command to display all the IPv4DT (IPv4/VLAN/MAC) entries in the IPv4DT table matching a specified MAC address.
| Format | show ip device tracking mac mac-address |
| Mode | Privileged EXEC |
| Parameter | Description |
|---|---|
| mac-address | MAC address of the device. |
The following fields are displayed in the output of this command.
| Field | Description |
|---|---|
| IP Address | The learned IPv4 address of the device. |
| MAC Address | The MAC address associated with the learned IPv4 address. |
| VLAN | The VLAN ID associated with an interface on which the device is learned. |
| Interface | The interface name on which the device is learned. |
| Time left to inactive | The number of seconds before the reachable device is set to INACTIVE. |
| Time since inactive | The number of seconds since the INACTIVE device was last reachable. |
| State | Specifies the device is in ACTIVE or INACTIVE state. |
| Source | Specifies the source of the device whether it is ARP, DHCP, or Static. |
Example: The following shows example CLI display output for the command.
(Switching) #show ip device tracking mac 01:02:03:04:05:06
IP Device Tracking for clients......................... Enable
IP Device Tracking Probe Generation.................... Enable
IP Device Tracking Probe Count......................... 3
IP Device Tracking Probe Interval.......................30
IP Device Tracking Probe Delay Interval.................30
-------------------------------------------------------------------------------
IP Address MAC Address Vlan Interface Time-left Time-since State Source
to inactive inactive
-------------------------------------------------------------------------------
10.21.1.1 01:02:03:04:05:06 2 1/0/1 50 0 ACTIVE ARP
20.21.1.1 01:02:03:04:05:06 2 1/0/1 50 0 ACTIVE ARP
