Use this command to define the Source Specific Multicast (SSM) range of IPv6 multicast addresses on the router.
Note:
Note the following:
- This command takes effect only when PIM-SM is configured as the PIM mode.
- Some platforms do not support a non-zero data threshold rate. For these platforms, only a Switch on First Packet policy is supported.
| Default | Disabled |
| Format | ipv6 pim ssm {default | group-address group-mask} |
| Mode | Global Config |
| Parameter | Description |
|---|---|
| default-range | Defines the SSM range access list FF3x::/32. |
Example: The following shows an example of the command.
(Routing)(Config) #ipv6 pim ssm default (Routing)(Config) #ipv6 pim ssm ff32::/32
