Use this command to configure the Data Threshold rate for the last-hop router to switch to the shortest path on the router. The rate is specified in Kilobits per second. The possible values are 0 to 2000.
Note:
Some platforms do not support a non-zero data threshold rate. For these platforms, only a Switch on First Packet policy is supported.
Note:
This command takes effect only when PIM-SM is configured as the PIM mode.
| Default | 0 |
| Format | ip pim spt-threshold 0-2000 |
| Mode | Global Config |
Example: The following shows an example of the command.
(Routing) (Config) #ip pim spt-threshold 100
