This table contains a list of all IPv6 firewall events.
- Telnet path:
- Idx.
- Sequential index. Furthermore, the table can also be checked via SNMP.
- System time
- System time in UTC encoding (converted to plain text for display).
- Source address
- Source address of the filtered packet.
- Destination address
- Destination address of the filtered packet.
- Prot.
- Protocol (TCP, UDP, etc.) of the filtered packets.
- Source port
- Source port of the filtered packet (only for port related protocols).
- Destination port
- Destination port of the filtered packet (only for port related protocols).
- Filter rule
- Name of the rule that created the entry.
- Limit
- Bit field that contains the description of the limit that caused the firewall to apply the filter. There following values are currently defined:
- 0x01: Absolute number
- 0x02: Number per second
- 0x04: Number per minute
- 0x08: Number per hour:
- 0X10: Global limit
- 0x20: Byte limit (if not set, it is a packet limit)
- 0x40: Limit only applies in the inbound direction
- 0x80: Limit only applies in the outbound direction
- Threshold
- Threshold limit value of the triggering limit.
- Action
- Bit field which lists all the actions performed. There following values are currently defined:
- 0x00000001: Accept
- 0x00000100: Reject
- 0x00000200: Establish filter
- 0x00000400: Internet (default router) filter
- 0x00000800: Drop
- 0x00001000: Disconnect
- 0x00004000: Lock source address
- 0x00020000: Lock destination address and port
- 0X20000000: Send SYSLOG notification message
- 0x40000000: Send SNMP trap
- 0x80000000: Send e-mail