Specifying client-bridge mode and bandwidth limit for each SSID

As of LCOS 9.00 you have the option of specifying the client-bridge mode and bandwidth limits for individual SSIDs.

Changes to stand-alone APs

The following settings are made in LANconfig in Wireless LAN > General > Logical WLAN settings > Network.

Client-bridge supportEnable this option for an access point if you have enabled the client-bridge support for a client station in WLAN client mode ().
Note: The client-bridge mode only operates between two LANCOM devices.
TX bandwidth limitWith this setting, you define the overall bandwidth that is available for transmission within this SSID (limit in kbps). A value of 0 disables the limit.
RX bandwidth limitWith this setting, you define the overall bandwidth that is available in the reception direction within this SSID (limit in kbps). A value of 0 disables the limit.

The settings of this name are thus removed from LANconfig under Wireless LAN > General > Physical WLAN settings. > Client modean also from the following menu items in WEBconfig:

Setup > Interfaces > WLAN > Client-Modes > Cl.-Brg.-Support
Setup > Interfaces > WLAN > Client-Modes > Tx-Limit
Setup > Interfaces > WLAN > Client-Modes > Rx-Limit

Changes to WLCs

The explanations added for a stand-alone AP to the changes in LANconfig also apply in the same manner to a WLC under WLAN Controller > Profiles > Logical WLAN networks.