This menu is used to compile test runs. A test run consists of multiple individual tests that are executed together.
At least one test in the WLAN-Connection category must be configured for each test profile. Additional individual tests can be added optionally, depending on which tests are to be performed.
If WLAN-Authentication is left empty, an open WLAN connection without encryption is used. In this case, the SSID must provide an open network.
Static IPv4 or IPv6 parameters can be left empty if no static parameters were selected in the respective IPvX-Mode.
Multiple individual tests of the same category can be executed per test profile. To do this, specify the corresponding tests separated by commas.
- Profile-Name
- The name of this test profile.
- WLAN-Connection
- Select one of the available WLAN connections.
- WLAN-Authentication
- Select one of the available WLAN authentication configurations.
- IPv4-Mode
- Select either DHCP or Static.
- IPv6-Mode
- Select either Router Advertisement, DHCPv6, Static, or Off.
- static IPv4 parameters
- If required, select the static IPv4 parameters.
- static IPv6 parameters
- If required, select the static IPv6 parameters.
- DNS-Targets
- Select one of the available DNS targets.
- Ping-Targets
- Select one of the available ping targets.
- Captive-Portal-Login
- Select one of the available captive portal logins.
- HTTP-Targets
- Select one of the available HTTP targets.
